ESYBOX DIVER – Multi-Stage Electronic Pump
7” electronic pump with variable speed drive, suitable for clean water applications in wells, cisterns, or tanks. Can be used submerged, partially submerged, or on the surface. Ideal for pressurization, rainwater reuse, gardening, and irrigation in residential buildings. Equipped with DConnect Box 2, PLC, and Wi-Fi.
Pump Features
- High-efficiency permanent magnet submersible motor, liquid-cooled
- AISI 303 stainless steel shaft
- Double mechanical seal up to 5.5 bar
- Electronically protected with quick-connect power cable
Motor Features
- Technopolymer body resistant to corrosion and oxidation
- Integrated non-return valve, debris filter, and overpressure valve
- Air-vent valve for easier priming
- Stainless steel handle for portability
- Integrated 0.04 L expansion vessel to prevent cycling/water hammer
- Three technopolymer impellers with stainless steel wear parts
- Adjustable suction height: 3.5, 4, 6, 8 cm
- IP 68 certified; certified drinking water version available
Electronic System
- Electronic operation with automatic start and stop
- Variable speed drive for system-dependent operation
- Adjustable working pressure from 1 to 5.5 bar
- Dry running protection
- NFC pocket for float sensor connection without opening the pump
- PLC communication for data transfer to DConnect Box 2
| Specification | Value |
|---|---|
|
Flow rate maximum: |
7,2 m3/h |
|
Head up to: |
55 m |
|
Maximum immersion depth: |
12 m standard version
Type of pumped liquid: Water Clean, free from solid or abrasive
substances, non-viscous, non-aggressive, non-crystallized and chemically
neutral |
|
Free passage: |
2 mm |
|
Minimum suction depth: |
110 mm |
|
Minimum level of water: |
35 mm |
|
Liquid temperature range: |
from 0°C to +55°C |
|
Minimum and maximum ambient temperature: |
<0°C / +50°C |
|
Maximum immersion depth: |
15 m |
|
Adjustable constant pressure: |
pre-set 3 bar, adjustable from 1 to 5,5 bar |
|
Outlet connection: |
Threated 1” 1/4 |
|
Pump maximum diameter: |
185 mm |
|
Impeller/s material: |
Technopolymer with ring impeller in AISI 304 stainless steel |
|
Maximum number of starts: |
60/h |
|
Protection class: |
IP 68 |
|
Non-stop service: |
yes |
|
Motor insulation class: |
F |
|
Power cable (m) and plug: |
15 m with plug |
|
Single phase power input: |
230 V 50 Hz / 60 Hz |
|
Possible type of installation: |
Fixed, horizontal or vertical. Submerged or semi-submerged. It can be installed on the surface, with positive suction,
in a vertical position with the DOC68 accessory (supplied separately). |
|
Special versions on request: |
X version with suction kit for suction at a higher level. Version for drinking water WRAS, ACS, NSF. Surface version (the DOC68 accessory is required). |
|
Certification: |
WRAS, ACS, NSF (only model for drinking water) are pending approval. |